[2018-April-NEW] High Pass Rate Cisco 300-115 Dumps SWITCH PDF Study Material With 100% Pass Rate Youtube (Update Questions) 25 – 40

Which material is useful for the Cisco 300-115 dumps exam? Pass4itsure Cisco 300-115 Dumps Certification Braindumps, High Pass Rate Cisco 300-115 Dumps Study Material With 100% Pass Rate, Pass Implementing Cisco IP Switched Networks – pass4itsure 300-115 Dumps (Update 543 Questions)

Exam Code: 300-115
Exam Name: Implementing Cisco IP Switched Networks
Q&As: 543

The 300-115 dumps Implementing Cisco IP Switched Networks exam is required for Cisco CCNP Routing and Switching, CCDP certification.The computer-based,multiple-choice exam tests the candidate’s knowledge of how to prepare and manage a virtual classroom environment and use collaboration tools to maximize student participation and comprehension. In this competitive IT industry, having some authentication certificate can help you promote job position. Candidates can prepare for the Cisco CCDP 300-115 dumps exam by taking the Implementing Cisco IP Switched Networks is able to apply these skills practically and provide guidance in pass4itsure.

[2018-April-NEW Cisco 300-115 PDF Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWLW41Sk5QSDdPTFU

[2018-April-NEW Microsoft 070-463 PDF Dumps From Google Drive]:https://drive.google.com/open?id=0BwxjZr-ZDwwWanJic19DTmpWLUU

★Share some Citrix Specialist Pass4itsure 300-115 Dumps with Exam Questions and Answers Below(25-40)★

QUESTION 25
VLAN maps have been configured on switch R1. Which of the following actions are taken in a VLAN map that does not contain a match clause?
A. Implicit deny feature at end of list.
B. Implicit denyfeature at start of list.
C. Implicit forward feature at end of list
D. Implicit forward feature at start of list.
300-115 exam Correct Answer: A

QUESTION 26
Refer to the exhibit.

Users of PC-1 experience slow connection when a webpage is requested from the server. To increase bandwidth, the network engineer configured an EtherChannel on interfaces Fa1/0 and Fa0/1 of the server farm switch, as shown here: Server_Switch#sh etherchannel load-balance EtherChannel Load-Balancing Operational State (src-mac):
Non-IP: Source MAC address
IPv4: Source MAC address
IPv6: Source IP address
Server_Switch#
However,traffic is still slow. Which action can the engineer take to resolve this issue?
A. Disable EtherChannel load balancing.
B. Upgrade the switch IOS to IP services image.
C. Change the load-balance method to dst-mac.
D. Contact Cisco TAC to report a bug onthe switch.
Correct Answer: C

QUESTION 27
Which two statements about SPAN source and destination ports during an active session are true? (Choose two.)
A. The source port can be only an Ethernet physical port.
B. The source port can be monitored in multiple SPAN sessions.
C. Thedestination port can be destination in multiple SPAN sessions.
D. The destination port does not participate in STP.
E. You can mix individual source ports and source VLANs within a single session.
300-115 dumps Correct Answer: BD

QUESTION 28
Which two statements about the HSRP priority are true? (Choose two)
A. To assign the HSRP router priority in a standby group, the standby group-number priority priority-value global configuration command must be used.
B. The default priority of a router is zero (0).
C. The no standby priority command assigns a priority of 100 to the router.
D. Assuming that preempting has also been configured, the router with the lowest priority in an HSRP group would become the active router.
E. When two routers in an HSRP standby group are configured with identical priorities, the router with the highest configured IP address will become the active router.
Correct Answer: CE

QUESTION 29
Refer to the exhibit.

Which statement about switch S1 is true?
A. Physical port Fa0/13, Fa0/14, and Fa0/15 successfully formed a Layer 2 port-channel interface using an open standard protocol.
B. Logical port Fa0/13, Fa0/14, and Fa0/15 successfully formed a Layer 2 physical port- channel interface using a Cisco proprietary protocol.
C. Physical port Fa0/13, Fa0/14, and Fa0/15 successfully formed a Layer 3 port-channel interface using a Cisco proprietary protocol.
D. Logical port Fa0/13, Fa0/14, and Fa0/15 successfully formed a Layer 3 physical port- channel interface using an open standard protocol.
300-115 pdf Correct Answer: A

QUESTION 30
Refer to the exhibit. What is the result of setting GLBP weighting at 105 with lower threshold 90 and upper threshold 100 on this router?

A. Only if both tracked objects are up will this router will be available as an AVF for group 1.
B. Only if the state of both tracked objects goes down will this router release its status as an AVF for group 1.
C. If both tracked objects go down and then one comes up, but the other remains down, this router will be available as an AVF for group 1.
D. This configuration is incorrect and will not have any effect on GLBP operation.
E. If the state of one tracked object goes down then this router will release its status as an AVF for group 1.
Correct Answer: B

QUESTION 31
A network administrator configures 10 extended VLANs ranging from VLANs 3051 to 3060 in an enterprise network. Which version of VTP supports these extended VLANs?
A. version 1
B. version 2
C. version 3
D. VTP does not recognize extended VLANs.
300-115 vce Correct Answer: C

QUESTION 32
What is the default HSRP priority?
A. 50
B. 100
C. 120
D. 1024
Correct Answer: B

QUESTION 33
Youhave been asked to install and configure a new switch in a customer network. Use the console access to the existing and new switches to configure and verify correct device configuration.

ImageData src=”images/300-115_img_38.jpg”/>
You are adding new VLANs. VLAN500 and VLAN600 to thetopology in such way that you need to configure SW1 as primary root for VLAN 500 and secondary for VLAN 600 and SW2 as primary root for VLAN 600 and secondary for VLAN 500. Which configuration step is valid?
A. Configure VLAN 500 andamp; VLAN 600 on both SW1 andamp;SW2
B. Configure VLAN 500 and VLAN 600 on SW1 only
C. Configure VLAN 500 and VLAN 600 on SW2 only
D. Configure VLAN 500 and VLAN 600 on SW1 ,SW2 and SW4
E. On SW2; configure vtp mode as off and configure VLAN 500 and VLAN 600; configure back to vtp server mode.
300-115 exam Correct Answer: A

QUESTION 34
A network engineer is setting up a new switched network. The network is expected to grow and add many new VLANs in the future. Which Spanning Tree Protocol should be used to reduce switch resources and managerial burdens that are associated with multiple spanning-tree instances?
A. RSTP
B. PVST
C. MST
D. PVST+
E. RPVST+
Correct Answer: C

QUESTION 35
Refer to the exhibit.

A network engineer wants to analyze all incoming and outgoing packets for an interface that is connected to an access switch. Which three items must be configured to mirror traffic to a packet sniffer that is connected to the distribution switch? (Choose three.)
A. A monitor session on the distribution switch with a physical interface as the source and the remote SPAN VLAN as the destination
B. A remote SPAN VLAN on the distribution and access layer switch
C. A monitor session on the accessswitch with a physical interface source and the remote SPAN VLAN as the destination
D. A monitor session on the distribution switch with a remote SPAN VLAN as the source and physical interface as the destination
E. A monitor session on the access switch with a remote SPAN VLAN source and the physical interface as the destination
F. A monitor session on the distribution switch with a physical interface as the source and a physical interface as the destination
300-115 dumps Correct Answer: BCD

QUESTION 36
Refer to the exhibit.

A network engineer changes the default native VLAN to VLAN 999. After applying the settings on theuplinks to the core switches, the switch control traffic, such as CDP and VTP, is no longer working. The standard configuration is used for each uplink. What is wrong with the configuration?
A. The interface is administratively down.
B. The encapsulationtype is incorrect.
C. The switchport mode trunk command should be first in the output.
D. The native VLAN is not present on the trunk.
E. The control traffic must be manually enabled on the new native VLAN.
Correct Answer: D

QUESTION 37
Which private VLAN access port belongs to the primary VLAN and can communicate with all interfaces,including the community and isolated host ports?
A. promiscuous port
B. isolated port
C. community port
D. trunk port
300-115 pdf Correct Answer: A

QUESTION 38
A network engineer notices inconsistent Cisco Discovery Protocol neighbors according to the diagram that is provided. The engineer notices only a single neighbor that uses Cisco Discovery Protocol, but it has several routing neighbor relationships. What would cause the output to show only the single neighbor?
A. The routers are connected via a Layer 2 switch.
B. IP routing is disabled on neighboring devices.
C. Cisco Express Forwarding is enabled locally.
D. Cisco Discovery Protocol advertisements are inconsistent between the local and remote devices.
Correct Answer: A

QUESTION 39
A server with a statically assigned IP address is attached to a switch that is provisionedfor DHCP snooping. For more protection against malicious attacks, the network team is considering enabling dynamic ARP inspection alongside DHCP snooping. Which solution ensures that the server maintains network reachability in the future?
A. Disable DHCPsnooping information option.
B. Configure a static DHCP snooping binding entry on the switch.
C. Trust the interface that is connected to the server with the ip dhcp snooping trust command.
D. Verify the source MAC address of all untrusted interfaces withip dhcp snooping verify mac-address command.
300-115 vce Correct Answer: B

QUESTION 40
Which option describes a limitation of LLDP?
A. LLDP cannot provide information about VTP.
B. LLDP does not support TLVs.
C. LLDP can discover only Windows servers.
D. LLDP can discover up to two devices per port.
Correct Answer: A

• Exam Name:Implementing Cisco IP Switched Networks
• Exam Number: 300-115 SWITCH
• Associated Certifications: CCNP Routing and Switching CCDP
• Duration: 120 minutes (30-40 questions)
• Available Languages: English, Japanese

The practical exam for Implementing Cisco IP Switched Networks assesses the candidate’s ability to lead a virtual classroom session with live participants using the techniques and best practices of skilled virtual instructors. Candidates submit a 120-minute Cisco recording in which they demonstrate the skills listed in the practical exam topics. Many companies that take a job promotion or increase salary for you will refer to how many gold content your authentication certificates have.The recordings receive a Pass or Fail score. Candidates must pass both the 300-115 SWITCH exam and the 300-115 dumps SWITCH practical exam to obtain certification.

Do you offer free after-sale services?

Yes. We provide 7/24 customer help and information on a wide range of issues. Our service is professional and confidential and your issues will be replied within 12 hous. Cisco 300-375 Exam PDF is a high gold content certification exam. Cisco 300-115 dumps pdf authentication certificate can meet many IT employees’ needs. Feel free to send us any questions and we always try our best to keeping our Customers Satisfied.

What Our Customers Are Saying:

Online self preparation methods then introduced for the ease of customers and we the one who are offering Cisco 300-115 preparation material for these professionals. Pass4itsure can provide you with Cisco certification 300-375 exam pdf targeted training. Cisco 300-115 dumps has become very essential for the Implementing Cisco IP Switched Networks exam career advancement.

You can free download Pass4itsure’s trial version of raining tools and some exercises and answers about Cisco certification 300-375 Exam PDF as a try. Pass4itsure’s practice questions and answers about the pass4itsure Cisco 300-115 dumps certification training materials is developed by our expert team’s wealth of knowledge and experience, and can fully meet the demand of Cisco certification 300-115 dumps training materials exam’s candidates.

Pass4itsure High Pass Rate Cisco 300-115 Dumps Implementing Cisco IP Switched Networks Study Material With 100% Pass Rate Youtube Training.